Toyana 618/1320 Deep groove ball bearings

A1:16 mm; L3:86 mm; H2:83 mm; B:30.2 mm; Designation of bearing:SES210; Recommended tightening torque for set screw:8.3 Nm; d:50 mm; T max.:100 °C; H1:102 mm; A5:20.2 mm;

d:40 mm; Mass (without HJ ring):0.69 kg; D1:75.9 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:7.27 Hz; ra max:1.5 mm; Dynamic load, C:80.3 kN; D:90 mm; Brand:SNR; Nref:7,000 rpm;

Bearing Retained:No; Bearing Material:Steel; RoHS:6; Number of Bearings:Double; Shape:T-Shaped; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Material:Steel; Bearing Part Number:6004; Height H(inch):2;

N1:16 mm; H2:51 mm; Z:47.5 mm; N:19mm; T max.:100 °C; L3:51 mm; Dz:60 mm; A2:24 mm; L1:62 mm; A:32 mm;

ra max:0.6 mm; Nlim (grease):22,600 rpm; Characteristic cage frequency, FTF:0.44 Hz; Nlim (oil):36,400 rpm; Preload value:0.039 kN; Dynamic load, C:13 kN; Db max:52.5 mm; Min operating temperature, Tmin:-20 °C; Axial rigidity:67.4 N/µm; Contact angle α:25 °;

Accessory:With steel plate cov; Stroke:No; Rolling Element Material:Bearing Steel; RoHS:6; Diameter series symbol:Medium Load; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):23300; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Insert Bearin

N:19mm; T max.:100 °C; C:35.1 kN; e:22 mm; S:24.6 mm; Designation of bearing:EX210G2T04; Recommended tightening torque for set screw:11.5 Nm; Z:67.5 mm; B:49.2 mm; H:197 mm;

Basic Load Rating, Static Rating(N):15400; Stroke:No; Basic Load Rating, Dynamic Rating(N):25700; Fit:J7; Bearing Unit, Type:Round flange shape; Accessory:No Cover; Unit Body Material:Cast Iron; Machining:Cast iron cover moun; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Inner Dia. Shape:C

Holder Surface Treatment:Clear Anodize; Flange O.D. H(φ):33; RoHS:6; Type:Bearings with Housin; Volume Discount:Available; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S;

H2:165 mm; d:49.21 mm; C:35.1 kN; L:206 mm; Recommended tightening torque for set screw:16.8 Nm; T max.:200 °C; L1:65 mm; Weight:3.74 kg; T min.:-20 °C; A1:36 mm;

d:50 mm; T max.:100 °C; d1:67.2 mm; Designation of housing:FCE210-; s1:42.9 mm; J:135 mm; Recommended tightening torque for set screw:11.5 Nm; C:35.1 kN; S:24.6 mm; A1:13 mm;

RoHS:6; Raceway Ring Shape:Tapered Roller; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Rotational Speed(rpm):8500; Clearance sign:No; Symbol of contact angle:No; O.D.(Ø):47; Precision (JIS):Grade 0; Load Direction:Radial;

Cup Part Number:Y32010X; da - Cone Frontface Backing Diameter:55.88 mm; Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:77.00 mm; Cg - Geometry Factor:0.0853; K - Factor7:1.38; Bearing Weight:0.4 Kg; a - Effective Center Location3:-2 mm; Design Units:METRIC; Cone Part Number:X32010X;

Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel; Bearing Part Number:608; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Shape:Flang

Da - Cup Frontface Backing Diameter:238.30 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38500 lbf; a - Effective Center Location3:-12.2 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; B:66.675 mm; db - Cone Backface Backing Diameter:159 mm; Cone Part Number:99500; e - ISO Factor8:0.41; G1